Want to know 7 tips for installing outdoor balcony blinds? Read on! Sitting on the balcony is one of the best experiences to get fresh air and protection from direct sunlight. With installing proper outdoor blinds, you will be well protected from the winds.
Outdoor blinds give a decorative look when you properly install them. Most people purchase outdoor blinds without knowing how to install them. These usually lead to even making the balcony look old fashioned, and anyone can peep in your house.
For privacy, there is always a need to install outdoor blinds in the right way. I have highlighted for you one of the best ways to install outdoor blinds easily.
The first step to install your blinds is identifying the point to install the outdoor blinds. You need to check your balcony and check where the blinds will fit well. Use a pencil to mark the best points where you will install the blinds.
Be very accurate as this will determine how your new balcony design will look. You can decide to use the roofline of your house if it is not too far for an attractive design.
Using a tape measure, measure the height of the balcony to determine the size of the outdoor blinds you need to install. Ensure you get a proper measure to avoid purchasing longer outdoor blinds. Write down the measures on a sheet of paper, both horizontal and vertical.
Measuring the height should not take much of your time, as it is a straightforward task. If you are not good at measuring, you can hire someone to do it on your behalf.
Before deciding to install your blinds, get the necessary tools that you will use. First, you will need a driller to make holes for the screws. Another thing is the blinds, ensure that your blinds have good design and resemble your house color.
Your blinds should be of the same size according to your measurement for a good fit. Other things include a tape measure, level, pencil, and screws. With these tools, you are ready to do the installation of the blinds.
Since you need professional blinds in your balcony, there is a need to drill accurately. Most blinds look old fashion because the driller made wide holes. Ensure you use the smaller driller in the only market place.
You can use a hammer if you are looking for a cheap method to drill for the screw to enter. Ensure that you do not drill more holes than you require. If again, you are not good at drilling, get an expert to do so.
Another great idea for installing your blinds well is ensuring that the blinds fit in your measurement. It would help if you had something perfect hence take your time and hold the outdoor blinds against the balcony.
By this, you will be able to know if the blinds fit and act accordingly. Your blinds should always match your measurement so that you will have the best design you desire. It is always a bad idea to notice that your blinds cannot fit the balcony when you are halfway.
After checking that your blinds fit the measurement, you need now to do the installation. Use the support hook instead of the permanent screws to avoid screwing in and out. After doing the test, you need to check on how your work is, move outside the gate and observe.
You will see if the blinds décor is what you are in need, or you need to change.
After ascertaining that the outdoor blinds are okay and the design is good for you, you need to use the screws to ensure that the blinds are intact. Ensure that every screw is very tight so that even when someone touches the blinds, they won’t squeeze.
Also, ensure that the blinds are as close as possible to give you privacy.
With the above tips, be sure that you will have one of the decent blinds in your area. Your balcony deserves to be treated better. It is the first thing that visitors will see once they approach your house hence need to be intact.
Always purchase the right blinds so that even after you install, they will be awesome.